Thank you to "Sci-Fi Photo Guys Digital Photo" who offered me a rendition photo background at the Roanoke Valley Comicon event.
They took my photo with a green screen and they asked me what
background, so I said use your best judgement.
I am very pleased with
their choice.
This week I started a new job at Advance Auto Parts just in time for Halloween.
So I suited up on Thursday and won 1st place for "best original costume".
This was also the first official test run with the working LED lights.
Both 9 volt batteries lasted all day (4 hours total time suited up).
Finished installing the LED lights.
Runs off two 9volt batteries.
Two switches: one for the headlights and taillights, the other for the red/blue flashers, one LED on each taillight flashes with the red/blue also.
Considering a future upgrade that will involve a siren with flasher LED's.
Finished helmet fan installation with 9 volt battery and on/off switch.
Soldered wires together and coated connections with glue gun.
Battery can be replaced by removing top plastic cover again.
Came up with a new way to attach face mask to helmet rather than having an elastic band around my head which was too tight.
I riveted plastic tabs on the top of mask that insert inside helmet slots, and then use a short piece of elastic looped onto screws to hold mask in place.
This way the mask stays attached to helmet and slightly tilt to adorn helmet and mask in one piece.
This new way of attaching mask also allowed for the helmet fan to blow air onto eyes to reduce fogging up.
Glued LED's into headlight sockets and shaped the red/blue plastic covers on front grill.
Originally was going to glue-gun the red/blue plastic covers into place, but decided to go with screw mounts in case the LED needs to be changed out.
Also ordered more wire-to-wire connectors and 22AWG wire.
Received the lights kit package in mail today.
Hooked up a 9 volt to verify all LED's work, very bright.
The kit came with a total of 16 LED lights, 8 white and 8 red, a 9 volt connector, on/off switch, and flasher strobe resistor.
Now to find some cheap crimp connectors and maybe some heat shrink tubing, and get started on installing lights for Halloween.
